Search
Physical Properties

Water Absorption: < 13%
Open Porosity*: < 35%
Compressive Strength*:
> 12.0 N/mm 2  
Flexural Strength*: > 5.0 N/mm 2



 

* Test reference to NBN EN 1926 (1999), NBN EN 12372 (1999)

General properties

Material Composition: Portland Cement, Light-Weight Aggregates and Iron Oxide Pigments.
Unit Weight: 33~45 kg/m 2  (varies according to profile).
Thickness: 15~60 mm (varies according to profile).

Molded from stone quarried in the upper midwest, Lime Stone faithfully reproduce one of nature’s most beautiful stone.

DESCRIPTION TYPE COVERAGE PACKING per pallet WEIGHT
CSI-075-077
Flat 0,76 mq/box 24 box
52 kg/ctn
CSI-075C-077C
Corner 1,82 ml/box 24 box 38 kg/ctn
 

Examples of rest Lime Stone

CSI-075 CSI-075 CSI-076 CSI-077
 

Installation

1) Do not apply to painted or finished surfaces or to damp or decaying plaster until all traces of paint or finishes have been removed through mechanical cleaning (such as sandblasting).

2) Do not apply to fine mortar or to finishes that are deteriorating or dusty. Intsead, it is advisable to remove the finish if possible or at least punctuate the surface or apply a fine electro-welded mesh, securely fastened to the wall.

3) Respect the joint spacing to allow for expansion of the materials.

4) Do not apply if the temperature of the surface is below 5 °C or above 30 °C (if the temperature is over 30 °C, wet the surface with water).

5) Do not apply to highly absorbent surfaces without using a suitable adhesive or without moistening the surface.

6) If, during application, the adhesive soils the stone, clean immediately with a wet sponge.

7) For external walls (e.g. garden walls), it is advisable to cover the stone (with a wall top covering or similar) in order to prevent water penetration.

8) Do not treat the stone with acids.

9) Regulations require that the stone is applied with the longer side horizontal.

Guarantee

The guarantee does not cover damages caused by the building and wall settling, by contacts with chemical products and discoloration caused by polluting substances carried by air.
Products and the product’s laying are guaranteed when made using KERAKOLL glue and filler, a trade-mark which will help you solve any problem you will encounter at the yard. It is advisable to buy the material with one single order as Europietra guarantee does not cover colour integrations or restorations, as even natural stone colours slightly vary when exposed to atmospheric agents.

Water repellent

Europietra products feature the addition of waterbased water repellent that greatly enhances the stone’s performance in humid climate. Water repellent is mixed with the composite material during manufacturing, thus providing a more lasting effect then spray, brush or paint mothod.

Non-combustible

Europietra products show zero flame spread and zero smoke development.

Copyright © 2009 EuroPietra - F.C.S. Realizzazioni Grafiche Commerciali
Per visualizzare il presente contenuto, aggiornare Adobe Flash Player.